LV Inspection
This is a visual inspection and no testing is required. Once the 'Report Type' LV Inspection' is selected from the drop‑down menu on the Carry out inspection page the specification for the inspection can be downloaded via the View Spec link.

Location
Is selected from the menu, the locations are stored alphabetically, start typing and the selector will go down to the first matching location.

Add Location
Can be selected to add a new location, it will then be available in the drop‑down menu. A new location must be added and saved before it can be selected in the location box.

A Circuit description must be added and there can exist multiple Circuit Descriptions for each location. A Defect can be logged or an Observation made.

• Defects
• Observation

A Defect is a non-compliance or issue which needs rectifying.

Add action defect
Setting to this switch yes will show additional options.

Defect Description  Typing in the box will show previously stored matching descriptions. If not found the new defect description can be added to the list via the Add new Defect Description link.

Corrective Works required
Enter details of the anticipated corrective action.

Defect Code Number  1, 2 or 3 Based on Severity.

1. Danger present, requires immediate remedial action
2. Potentially dangerous, requires remedial action
3. Not a hazard, but non-compliant

Add photo of the item/non-compliance. This is required and can be taken with your phone or tablet to ease identification then added in with ‘Choose file’ option.

Additional Comments can then be added but are not mandatory

There is no defect and the item is compliant but the inspector wants to add a general comment, e.g. as a note for future inspection or to raise an issue the observation selection provides a text box for notes. These will be listed in any reports but not added to the defect list.

LV inspections do not require confirmation of compliance for specific items but each location must be inspected.
If there is a defect raised at a location this will confirm that location has been inspected.
If no defect then at least 1 observation should be made for that location, enter any comment to confirm and record that the inspection was done.

Click on Save to complete the inspection.

🔝